Measuring Tools

• Professional digital laser spirit level with vertical and horizontal angle display and spot laser (650 nm).
• Inclination indicated in degrees (°), percent (% = m/m) or slope (in/ft rise) on the illuminated LCD.
• High precision horizontal resolution to 0.01° or 0.01%.
• 
  
• Acoustic signal indicates the horizontal, vertical and 45° positions.
• 
  
• The zero set mode enables angles to be checked, or repeated elsewhere.
• 
  
• Separate measurement memory allows up to 9 measurements readings to be stored and retrieved.
• On-site re-calibration function included. This is a Test & Inspect product.

 

 

 

Mitutoyo offers a complete selection of Bore Gages,
all of them with interchangeable anvils and necessary accessories to
perform close tolerance ID measurements.

• Most popular Bore Gages.
• Carbide-tipped contact points for durability.
  
• The dial indicator is fully protected by a rugged cover.
• Optional extension rods can be attached for measuring deep holes.

Technical Data

Accuracy: 5µm / .0002”
Indication stability: 2µm / .00008” 
Graduation: 0.01mm, 0.001mm, .0005" or .0001"

FEATURES: 

Technical Data

Resolution: 0.01mm or .0005"/0.01mm
Display: LCD, 6-digit
Length standard: ABSOLUTE electrostatic capacitance type linear encoder
Max. response speed: Un limited
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 5000 hours under normal use

Function :

Origin setting, ABS/INC switching, Presetting, -/+ switching, Data hold, Data output, inch/mm conversion
(inch/mm models) 
Alarm: Low voltage, Counting value composition error

FEATURES:

• IP65 water/dust protection 340 series
  models with a range up to 12in/300mm.
• Wide measuring range with interchangeable anvils.
• With a Ratchet Stop for constant force.
• Supplied with zero-setting standards bar for each range.
• With SPC output (Series 340).
• Supplied in fitted wooden case.

FEATURES: 

• The thin blade type jaws fit into very small grooves and making previously difficult outside measurements far easier to obtain.
• The OD measuring faces are carbide-tipped.
• With depth bar.
• With SPC data output. (Series 573)
• Supplied in fitted plastic case.

Richter Dipping Tapes and Accessories

Richter Dipping Tapes are manufactured to Institute of Petroleum Specifications and are suitable for Crude Oil, Petroleum products and many Chemicals.
The Tapes, are graduated with raised markings, in mm. on dark etched background which are supplied in various lengths from 10 metres to 30 metres, and are fitted into a Brass winder with a Wooden handle, with an end-fitting for the required dip weight.

The Stainless Steel Dip Weight is supplied separately.

Refill Tapes are also available, which can be easily fitted to existing frame.

The only one film in the world that can visualize contact pressure

Examples of application

Suitable for many other different applications

• Adjustment of pressure distribution of LCD panel assembly systems
• Adjustment of nip roll pressure balance of high-performance films
• Adjustment of pressure balance for lamination rolls
• Measurement of winding pressure for high-performance films
• Adjustment of pressure distribution for vacuum laminators
• Adjustment of polishing pressure distribution in semiconductor CMP processes
• Adjustment of lamination pressure distribution for multilayer printed circuit boards
• Adjustment of pressure distribution and flow check for fuel cell stacks